Serie AcousticPerformance

The AcousticPerformance series enables installations requiring high SPL and full bandwidth performance.  These highly versatile installation loudspeakers maintain their remarkable sonic signature even at high output levels.  AcousticPerformance is perfectly suited for houses of worship, dance clubs, themed entertainment, or other high SPL demanding installations.

AcousticPerformance™ is a line of professional loudspeakers which are ideal for a variety of installed sound reinforcement applications requiring high power in a stylish enclosure. All models feature a 3-inch voice coil compression driver combined with high-output woofers to deliver exceptional full bandwidth reproduction.

The uniform power-response of AcousticPerformance loudspeakers is a result of Directivity Matched Transition (DMT™), a design approach that matches the compression driver to the natural coverage angle of the woofer in the cross-over region. Key to the extraordinary accuracy and flat power response of the AcousticPerformance line are the conical waveguides which help deliver remarkably consistent coverage with smooth and accurate reproduction both on and off-axis.

AcousticPerformance™ models may be used in passive (full-range) mode to minimize amplifier channel count or bi-amp mode for greater control and performance. To further enhance performance, bi-amp and full-range tunings Intrinsic Correction techniques are available via Q-SYS™.

All models feature M10 mounting points for deployment via eye-bolts as well as mount points for an optional yoke bracket.  Multi-purpose (m suffix) models feature wedge angles, making them ideal for floor monitor use and also include pole cups for loudspeaker stand deployment. 

Subwoofer models feature a unique input cup where the two NL4 connectors are arranged in a crossed configuration.  This versatile design allows a single NL4 cable to carry both sub and top box signal without the need of a custom turn cable.

To further present a professional, clean and unobtrusive look, AcousticPerformance grilles are unadorned; eliminating the need to cover-up logo treatments which can be difficult to hide or remove. The grille is also lined with acoustically transparent backing, adding to the enclosure’s professional appearance.

To minimize impact and disposal fees at the job site, all AcousticPerformance loudspeakers are packaged in environmentally friendly, recyclable cartons.

SELECT A MODEL

Loudspeakers

  AP-4122m AP-5102 AP-5122 AP-5152

Frequency Range at (-10 dB)

 55 Hz to 20 kHz  60Hz – 18kHz 48Hz – 18kHz 44Hz – 18kHz

Rated Noise Power/Voltage1

  325W / 36 V 450W / 54V 550W / 60V 625W / 65V

Sensitivity2

  96 dB, 1W@1m 94dB, 1W@1m 95dB, 1W@1m 96dB, 1W@1m

Coverage Angle

 90° conical DMT 105° conical DMT 90° conical DMT 75° conical DMT

Output 1 (Peak SPL @ 1M)

 127 dB 127 dB 128 dB 129 dB

Driver Information:

LF

 

HF

 

 305 mm (12-inch) driver
with 64 mm (2.5-inch)
voice coil


45 mm (1.75-inch)
voice coil,
compression driver 		 254 mm (10-inch) driver
with 76 mm (3-inch)
voice coil;
450W / 54V (2 Hrs)


76 mm (3-inch) voice coil,
compression driver;
72W / 24V (2 Hrs)		 305 mm (12-in) driver
with 102 mm (4-in) voice coil;
450W / 60V (2 Hrs)


76 mm (3-inch) voice coil,
compression driver;
72W / 24V (2 Hrs) 		 381 mm (15-inch) driver
with 102 mm (4-inch)
voice coil;
525W / 65V (2 Hrs)


76 mm (3-inch) voice coil,
compression driver;
72W / 24V (2 Hrs)

Rated Impedance

 4Ω 8Ω  8Ω  8Ω

Input Connectors

 Two NL4 connectors Barrier Strip, NL4 connector Barrier Strip, NL4 connector Barrier Strip, NL4 connector

Enclosure

 15-ply Baltic birch plywood

Net Weight

 39.7 lb / 18.1 kg  48 lb / 21.7 kg 65 lb / 29.5 kg 80 lb / 36.2 kg
   Details Details Details Details

1 Two hour rating using IEC60268 noise based on minimum impedance.
2 Mid-band based on nominal impedance.


All specifications are subject to change without notice.

 

Subwoofers

  AP-212sw

Frequency Range at (-10 dB)

 35 Hz to 250 Hz

Rated Noise Power/Voltage1

 600W / 49V

Sensitivity2

 93dB, 1W@1m

Output 1 (Peak SPL @ 1M)

 128 dB

Driver Information:

LF

 

HF

 

 Two 305 mm (12-inch)
weather resistant cone woofers
with 64 mm (2.5 in) voice coil


N/A

Rated Impedance

 4Ω

Input Connectors

 Two NL4 crossed:
A: Sub 1+/-, Thru 2+/-
B: Thru 1+/-, Sub 2+/-

Enclosure

 15 mm Baltic birch plywood

Net Weight

 65.4 lb / 30.4 kg
  Details

1 Two hour rating using IEC60268 noise based on minimum impedance.
2 Mid-band based on nominal impedance.


All specifications are subject to change without notice.


Accessories

  Yoke Mount Eyebolt Kit Speaker Pole Part Number Caster Kit Part Number

AP-4122m

 AP-YM12m M10 kit-W SP-36 N/A

AP-5102

 AP-YM10  M10 kit-W N/A N/A

AP-5122

 AP-YM12 M10 kit-W N/A N/A

AP-5122m

 AP-YM12m M10 kit-W SP-36 N/A

AP-5152

  N/A M10 kit-W N/A N/A

 AP-212sw

  N/A N/A N/A Subwoofer Caster Kit