Current Slide: 1 / 1 Features & Benefits Rightsized Amplification: Four output channel models at 60 W per channel Flex I/O: Two onboard software-definable flex channels (as mic/line inputs with 48V phantom power, or as line level outputs) Bi-directional GPIO: Power/control microphone LEDs, sensors or buttons using four bi-directional...
Current Slide: 1 / 1 Features & Benefits Rightsized Amplification: Four output channel models at 60 W per channel Flex I/O: Two onboard software-definable flex channels (as mic/line inputs with 48V phantom power, or as line level outputs) Bi-directional GPIO: Power/control microphone LEDs, sensors or buttons using four bi-directional...
Features High performance for large cinemas 12" (305 mm) woofer with 2.5" (63 mm) voice coil 1.75” voice coil (44 mm) coaxially-mounted high frequency driver Pre-installed speaker-side mounting hardware for fast, easy, and secure installation. Use with QM-SW or QM-BW for wall mounting (sold separately). Very high-power handling meets...
Features SB-7218 features dual 700-watt transducers Frequency range extends to below 25 Hz when used with the correct B6 filter DCM and SF-3 signal processors optionally available Enclosures feature vandal-resistant woofer mounting bolts SPECIFICATIONS SB-7218 Frequency Range 1 (-6 dB, Half space) (-10 dB, Half space) 22–100 Hz...
Features 3-way bi-amplified or passive screen channel system MH-1060X provides 90° horizontal by +20° to -30° vertical coverage LF-2215 is constructed of MDF and is heavily braced Low-distortion waveguides provide highly articulate dialogue Shallow depth (20”) facilitates installation SPECIFICATIONS SC-223X Nominal Coverage 90°...
Features High performance in a small package Directivity Matched Transition ® (DMT) provides balanced sound between woofer and horn 8" (200 mm) woofer with 2" (50 mm) voice coil 1.4" (35 mm) titanium diaphragm compression driver Pre-installed speaker-side mounting hardware for fast, easy, and secure installation. Use with QM-SW or QM-BW...
Features Optimized design for smaller cinemas—up to 45 ft (14 m) in length Single enclosure, two-way screen channel loudspeaker Requires less than 12 inches (305 mm) behind screen Passive crossover requires only one amplifier channel 90° Axisymmetric horn 15 -inch (380 mm) woofer with 3 -inch (76 mm) voice coil 1.75 -inch (44 mm) voice...
Features High quality transducers provide exceptional clarity through the critical voice range. Improved musicality often not seen in typical BGM class products. Ported baffle for increased low frequency extension down to 70 Hz. Low saturation 70/100V transformers with 8 ohm bypass. 4-pole Euroblock connector eases system wiring....
Analog I/O cards: CIML4 (Discontinued) Mic/Line Analog Input Card: Four channels of switchable microphone and/or line-level analog audio input with 48 V phantom power as well as high-quality preamplification and A/D conversion. This card provides inputs for microphones, mixers and CD/DVD players. CIML4-HP (Discontinued) High Performance...
Current Slide: 1 / 1 Features & Benefits Native PoE pendant-mount loudspeaker for Q-SYS 4-inch, full-range driver Powered-over-Ethernet enables power, data, and control over a single cable Consistent tonal characteristics across the entire NL Series family to let you mix and match form factors Q-SYS integrates loudspeaker voicings...
