Features Studio reference-quality loudspeaker system Part of the Reference Monitor System, including matched RSB-212 subwoofer, signal processing, and amplification Optimized for use behind a perforated screen Directivity Matched Transition ® (DMT) ensures smooth, coherent power response throughout the listening area 90° axisymmetric...
Features High quality transducers provide exceptional clarity through the critical voice range. Improved musicality often not seen in typical BGM class products. Ported baffle for increased low frequency extension down to 70 Hz. Low saturation 70/100V transformers with 8 ohm bypass. 4-pole Euroblock connector eases system wiring....
Key Features 32 line level balanced inputs High performance analog-to-Dante conversion on terminal block connectors Software-selectable pad can be configured for professional (+4 dBu) or consumer (-10 dBV) input levels for each 16 channel input bank. Front panel offers network audio level control Available Q-SYS control plugin – no...
Features High Performance for all Cinema applications 8" (203 mm) woofer 1" (25 mm) dome tweeter Pre-installed speaker-side QM mounting hardware Accepts YM-300 yoke bracket SPECIFICATIONS SR-800 Frequency Range 1 (-10dB, Half space) 60 Hz to 20 kHz Rated Coverage Angle (-6 dB) 135° conical Maximum Rated SPL 4 Calculated Peak at...
Key Features Simple, flexible and installation-friendly solution for point-to-point analog audio signal extension over CAT-5/6 Two balanced, line-level Flex I/O ports allow 2 x 0, 1 x 1 and 0 x 2 audio extension Supports up to +24 dBu analog audio signal level on inputs and outputs RS-232 allows for control integration into network AV...
Features High performance for large cinemas 12" (305 mm) woofer with 2.5" (63 mm) voice coil 1.75” voice coil (44 mm) coaxially-mounted high frequency driver Pre-installed speaker-side mounting hardware for fast, easy, and secure installation. Use with QM-SW or QM-BW for wall mounting (sold separately). Very high-power handling meets...
DCIO has been discontinued. Consider the DCIO-H as a replacement. Please check with your Q-SYS regional sales representative for remaining DCIO stock availability. Features Digital Cinema Inputs/Outputs for Q-SYS™ enabled cinemas and cinema complexes Routes inputs/outputs from projector IMB and alternate content sources to Q-SYS Core...
Features 12-inch weather treated woofer; 1.4-inch compression driver 75° conical DMT™ coverage Maximum peak SPL 126 dB Directivity Matched Transition ® (DMT) ensures smooth, uniform frequency response over the coverage area X-Mount™ system enables the loudspeaker to be easily installed and deployed at a variety of angles with no...
Features & Benefits Four (4) output channels at 250 W per channel Lo-Z, Hi-Z, 70 V and 100 V direct drive available on all channels (no bridging or manual switches required) Four (4) analog, line-level audio inputs, fully routable into Q-SYS or direct out Two (2) gigabit Ethernet ports for redundant networked audio Standalone mode...
Features & Benefits Four (4) output channels at 500 W per channel Lo-Z, Hi-Z, 70 V and 100 V direct drive available on all channels (no bridging or manual switches required) Four (4) analog, line-level audio inputs, fully routable into Q-SYS or direct out Two (2) gigabit Ethernet ports for redundant networked audio Standalone mode...
