Synapse D32o (Discontinued)
Dante™/AES67 Networked Audio Interface (Attero Tech)
The Attero Tech Synapse D32o is a high-performance networked audio interface supporting Dante™ with AES67 interoperability. It features 32 balanced line level outputs with digitally controlled attenuation from 0 to -100 dB. All outputs are available independently for routing from the Dante / AES67 network audio interfaces.
This product has been discontinued. Please check with your Q-SYS regional sales representative for remaining stock availability.
Consider the Q-SYS QIO Series network mic/line expanders as a replacement:
- The QIO Series of network audio I/O expanders enable interoperability with non-networked audio endpoints to expand the power of Q-SYS across more devices.
Key Features
- 32 balanced line level outputs
- Front panel for network audio level control
- Software-controllable output matrix routing
- Pairs with the Attero Tech Synapse D32i for high quality network audio signal extension, or driving large racks of analog input amplifiers
- Q-SYS Extension allows for drag-and-drop integration into your Q-SYS design
Synapse D32o Specifications:
| Analog Outputs | |
| Maximum output level | +24 dBu |
| Output impedance | 200 Ω |
| Output type | 3-pin XLR-F |
| Headphone Output | |
| Connector | 0.25 in TRS jack |
| Controls | Mute / volume encoder |
| Load | 32 Ω minimum |
| Audio Networking | |
| Protocol support | Dante™ with AES67 support |
| Channel count | 32 Dante RX |
| Modes | Switched or Redundant mode |
| Ports | 2 x 1 Gb copper on RJ-45, 2 x 1 Gb SFP |
| General | |
| Dimensions (HWD) | 1.75 x 19 x 20 in (44.5 x 482.6 x 508 mm) |
| Weight | 6 lb (2.72 kg) |