Key Features Simple, flexible and installation-friendly solution for point-to-point analog audio signal extension over CAT-5/6 Two balanced, line-level Flex I/O ports allow 2 x 0, 1 x 1 and 0 x 2 audio extension Supports up to +24 dBu analog audio signal level on inputs and outputs RS-232 allows for control integration into network AV...
Features Dual voice-coil for improved thermal dissipation and higher output Low saturation and low-loss 70/100 V transformers in mono mode Low-Z mono or stereo configurable 4x built-in high-pass filtered outputs Locking 4-pole Euroblock connectors Reversible rear panel cover with cable tie anchors Reversible V-wall mount hardware...
Features Dual voice-coil for improved thermal dissipation and higher output Low saturation and low-loss 70/100 V transformers in mono mode Low-Z mono or stereo configurable 4x built-in high-pass filtered outputs Locking 4-pole Euroblock connectors Reversible rear panel cover with cable tie anchors Reversible V-wall mount hardware...
Features & Benefits Four (4) output channels at 250 W per channel Lo-Z, Hi-Z, 70 V and 100 V direct drive available on all channels (no bridging or manual switches required) Four (4) analog, line-level audio inputs, fully routable into Q-SYS or direct out Two (2) gigabit Ethernet ports for redundant networked audio Standalone mode...
Connect to Q-SYS Reflect This Q-SYS Product can be connected to our powerful monitoring and management solution. Start your free trial today! Features & Benefits Two (2) balanced mic/line inputs ona 3-pin XLR (mic level) with combination ¼" TRS connector (line level) +48 V phantom power Integrated Axiom port enables integration of...
This product has been discontinued. Please check with your Q-SYS regional sales representative for remaining stock availability. Consider the PL Series performance loudspeakers as a replacement: The PL Series is a portfolio of performance loudspeakers designed to deliver premium sound for Q-SYS systems in a broader range of...
Key Features Provides bi-directional USB connectivity (2 x 0, 1 x 1 or 1 x 0 playback/record channels) Simple, plug-and-play solution with LED indication of power and mute state Single-gang, Decora form factor RS-232 control over volume and mute Ships with both black and white Specifications: Audio Connector type USB type B USB...
Features Studio reference-quality subwoofer system Part of the Reference Monitor System, including matched RSC-112 screen channel loudspeaker, signal processing, and amplification Optimized for use behind a perforated screen Two long-throw 12-inch (305 mm) woofers with 3-inch (76 mm) voice coils M10 threaded inserts offer flexible and...
Features & Benefits 64 x 64 networked audio channels (Q-LAN / AES67) 8x on-board Flex channels and GPIO 8x AEC processors up to 32 x 32 Dante audio channels (8 x 8 included) USB AV bridging (8 x 8 audio + Q-SYS camera support) Full-featured Q-SYS Control engine (with optional feature license) External USB audio device host Up to 2x VoIP...
Features Up to 60 watts per channel into 4 and 8 ohms — The outputs of the SPA2-60 and SPA4-60 are designed to provide 60 watts per channel into Low-Z loads ENERGY STAR® qualified amplifier — The SPA2-60 and SPA4-60 are EnergyStar qualified amplifiers; efficient class-D amplifiers that conserve energy and require no active cooling, so...
