DPM 100/100H/300/300H, DCM 100/300
DPM Manager™ is the software application for set-up and configuration of the DPM Series Cinema Audio Processor/Monitor/Crossovers and DCM 100 and DCM 300 Crossover/Monitors, and for monitoring sound system operation. It provides all the necessary setup tools and system management objects to configure the auditorium audio format, select the audio source material, configure the DSP signal path, apply crossovers and EQ, define the routing of audio to the amplifiers, and define the loudspeaker models and signal processing.
Your computer must meet the following minimum requirements:
- Computer with Windows® 7, 8, or 10 OS (32 or 64 bit) or MAC OS 10.12 or higher (including Catalina 10.15)
- Minimum of 4 GB of RAM
- Display resolution of at least 1024 x 768
Version 126.96.36.199 - September 6, 2023
- Includes support for new hardware revision to replace end-of-life components.
- Resolves crashes of network-connected DPMs due to SNMP traffic with formats not supported by DPM.
- Serial port output string limited to size of response (previously output a full buffer terminated with extra '0's)
- Other bug fixes and improvements.
For DCP 300 Digital Cinema Processors
The DCP Manager software controls DCP 300 Digital Cinema Processors and gives you an easy interface that allows you to communicate, configure and monitor the operation of your cinema sound system. Using a simple menu-driven approach, it's quick to design a configuration, which is a complete set of parameter settings that change the audio routing, crossover filters, gains, delays, diagnostics and monitor behavior within the DCP Series hardware unit. All configuration data is stored in the DCP device, and can also be saved to a removable SD memory card in the DCP for backup and to quickly reproduce settings on other DCP units.
Version 3.01.18 - Sep 01, 2013
Includes firmware update needed to support DCPNet
DCPNet is a powerful software application that provides comprehensive network-based monitoring and control for multiple QSC digital cinema processors and DCA amplifiers – both individually as well as simultaneously all on one screen.
DCPNet enables network access to any DCP Series cinema processor. DCPNet makes it possible to monitor and adjust most DCP processor settings for any theatre or even an entire multiplex from within the theatre itself, an office location, or anywhere else with network access. Along with volume, mute and audio preset control, DCPNet allows the user to turn QSC DCA Cinema Amplifiers on and off and monitor amplifier operating conditions like temperature and impedance loading. Control presets allow the use of relays in the DCP Digital Cinema Processor and DXP Digital Expansion Processor to control external devices like masking and curtain motors and dimmers. The new DCPNet application, along with DCPConnect, the mobile application that turns an iOS or Android mobile device into a complete cinema sound remote controller, gives theatre operators an unprecedented level of control over their QSC Cinema Sound systems.
DCM 10, DCM 10D, DCM 30 and DCM 30D
The DCM Manager gives you an easy interface that allows you to communicate with your Digital Cinema Monitor. DCM Manager allows you to design a configuration, which is a complete set of parameter settings that change the audio routing, crossover filters, gains, delays, diagnostics and monitor behavior within the DCM hardware unit.
- Compatible with Windows 10
- Updated speaker settings for QSC speakers
- Speaker settings for discontinued QSC speakers can be found in the database by selecting 'QSC Legacy' as the speaker make
Some users have reported difficulty connecting to QSC DCP and DCM processors via USB. The issue seems to occur with Windows 8 and Windows 10. To resolve this issue, please download the appropriate USB driver package for your 32-bit or 64-bit OS, and follow the installation instructions.