Synapse DM1
Dante™/AES67 rackmount audio monitor (Attero Tech) (discontinued)
The Attero Tech Synapse DM1 is a rackmount network audio monitor for confidence monitoring network audio and local sources via headphones or the device’s integrated loudspeakers. It also features AES-3 digital outputs for connectivity to full-range powered loudspeakers or amplifiers, along with two channels of analog I/O for local source monitoring and network I/O connectivity.
Key Features
- Monitor up to 32 Dante network audio channels in two modes:
- Standard: Monitor any of the 32 channels assigned to the Dante/AES67 receiver inputs
- Extended: Subscription-based monitoring of up to 128 Dante/AES67 channels loaded to the DM1 (managed via unIFY Control Panel Software).
- Local audio input channels provide on-ramps into Dante/AES67 audio network
Synapse DM1 Specifications:
| Analog Inputs | |
| Maximum input level | +24 dBu |
| Input type | 3-pin XLR-F |
| Analog Outputs | |
| Maximum output level | +24 dBu |
| Input type | 3-pin XLR-M |
| Headphone Output | |
| Connector type | 1/4" jack |
| Controls | mute / volume encoder |
| Load | 32 Ω minimum |
| Speaker Outputs | |
| Output power | 3 W per channel @ 8 Ω |
| Audio Networking | |
| Protocol support | Dante™ with AES67 support |
| Channel count | 32 Dante RX |
| Modes | Switched or Redundant mode |
| Ports | 2 - Gb copper on RJ-45, 2 - Gb SFP |
| General | |
| Dimensions (HWD) | 1.75 x 19 x 12.5 in (44.5 x 482.6 x 5080 mm) |
| Weight | 6 lb (2.72 kg) |