Current Slide: 1 / 1 Features & Benefits Rightsized Amplification: Four output channel models at 60 W per channel Flex I/O: Two onboard software-definable flex channels (as mic/line inputs with 48V phantom power, or as line level outputs) Bi-directional GPIO: Power/control microphone LEDs, sensors or buttons using four bi-directional...

Features Analog inputs accept audio from cinema processors or other 8 channel analog audio sources QSC Intrinsic Correction DSP Settings for optimal performance of QSC cinema speakers Booth monitor with front panel control for easy operation Passive, bi-, tri- or quad-amp Compatible with all existing QSC DCA amplifiers Bypass mode -...

Features SB-7218 features dual 700-watt transducers Frequency range extends to below 25 Hz when used with the correct B6 filter DCM and SF-3 signal processors optionally available Enclosures feature vandal-resistant woofer mounting bolts   SPECIFICATIONS   SB-7218 Frequency Range 1 (-6 dB, Half space) (-10 dB, Half space) 22–100 Hz...

Features Up to 60 watts per channel into 4 and 8 ohms — The outputs of the SPA2-60 and SPA4-60 are designed to provide 60 watts per channel into Low-Z loads ENERGY STAR® qualified amplifier — The SPA2-60 and SPA4-60 are EnergyStar qualified amplifiers; efficient class-D amplifiers that conserve energy and require no active cooling, so...

Features Up to 60 watts per channel into 4 and 8 ohms — The outputs of the SPA2-60 and SPA4-60 are designed to provide 60 watts per channel into Low-Z loads ENERGY STAR® qualified amplifier — The SPA2-60 and SPA4-60 are EnergyStar qualified amplifiers; efficient class-D amplifiers that conserve energy and require no active cooling, so...

Features High performance for large cinemas 12" (305 mm) woofer with 2.5" (63 mm) voice coil 1.75” voice coil (44 mm) coaxially-mounted high frequency driver Pre-installed speaker-side mounting hardware for fast, easy, and secure installation. Use with QM-SW or QM-BW for wall mounting (sold separately). Very high-power handling meets...

Features Up to 200 watts per channel into 4 and 8 ohms — the outputs of the SPA2-200 model are designed to provide up to 200 watts per channel into Low-Z loads. ENERGY STAR® qualified amplifier — The ENERGY STAR qualified SPA amplifiers employ an efficient class-D design to conserve energy and reduce operational cost. Bridgeable outputs...

Current Slide: 1 / 1 Features & Benefits 2 x balanced XLR mic/line inputs, 2 x RCA and 1 x 3.5 mm input  1 x 3.5 mm output and 2x balanced outputs on a side-mounted depluggable connector, with software-controllable volume Q-SYS Extension allows for drag-and-drop integration into your Q-SYS design PoE capable Three software-selectable...

Features High quality transducers provide exceptional clarity through the critical voice range. Improved musicality often not seen in typical BGM class products. Ported baffle for increased low frequency extension down to 70 Hz. Low saturation 70/100V transformers with 8 ohm bypass. 4-pole Euroblock connector eases system wiring....

Features Passive, 2-way, screen channel system HF-75CX2 provides 90° horizontal by +20° to -35° vertical coverage LF-2215 is constructed of MDF and features single woofer chambers Low-distortion waveguide provides highly articulate dialogue Shallow depth (20”) facilitates installation behind the screen   SPECIFICATIONS   SC-222X Nominal...