Features 4.5-inch weather treated woofer; 0.75-inch silk dome tweeter 120° conical DMT™ coverage 30 watt low-saturation and low-loss 70/100V transformer with 8Ω bypass Maximum peak SPL 110 dB (8 ohm bypass) Directivity Matched Transition ® (DMT) ensures smooth, uniform frequency response over the coverage area X-Mount™ system enables...

Features High quality transducers provide exceptional clarity through the critical voice range. Improved musicality often not seen in typical BGM class products. Ported baffle for increased low frequency extension down to 70 Hz. Low saturation 70/100V transformers with 8 ohm bypass. 4-pole Euroblock connector eases system wiring....

Current Slide: 1 / 1 Key Features Q-SYS Extension enables integration existing Q-SYS PA Router functionality in Q-SYS Designer Software Bi-color (red/green) Ready, Busy, and Zone Status LEDs can indicate zone and system status, driven by the PMS controller Convenient rear panel switch allows the use of either dynamic or phantom powered...

Current Slide: 1 / 1 Key Features Q-SYS Extension enables integration of existing Q-SYS PA Router functionality in Q-SYS Designer Software Bi-color (red/green) Ready, Busy, and Zone Status LEDs can indicate zone and system status, driven by the PMS controller A convenient rear panel switch allows the use of either dynamic or phantom...

Features Up to 60 watts per channel into 4 and 8 ohms — The outputs of the SPA2-60 and SPA4-60 are designed to provide 60 watts per channel into Low-Z loads ENERGY STAR® qualified amplifier — The SPA2-60 and SPA4-60 are EnergyStar qualified amplifiers; efficient class-D amplifiers that conserve energy and require no active cooling, so...

Current Slide: 1 / 1 Features and Benefits Build for Q-SYS – Simple drag-and-drop integration into your Q-SYS design, enabling network routing, advanced processing and control. Legacy of power redefined – These network amplifiers are built with a 5th generation high-efficiency, Class-D hybrid powertrain design built upon the dependable...

Current Slide: 1 / 1 Features and Benefits Build for Q-SYS  – Simple drag-and-drop integration into your Q-SYS design, enabling network routing, advanced processing and control. Legacy of power redefined – These network amplifiers are built with a 5th generation high-efficiency, Class-D hybrid powertrain design built upon the dependable...

Features Up to 200 watts per channel into 4 and 8 ohms — the outputs of the SPA4-100 model are designed to provide up to 100 watts per channel into Low-Z loads. ENERGY STAR® qualified amplifier - The ENERGY STAR qualified SPA amplifiers employ an efficient class-D design to conserve energy and reduce operational cost. Bridgeable outputs...

FEATURES Active Inrush Limiting - won't blow circuit breakers at turn-on Both speaker and monitor panel outputs Exclusive PowerLight power supply for great bass A hum-free noise floor and ultra-low distortion Only 3.5 inches high; even the most powerful systems can be built with only one rack DataPort interface for DCP Digital Cinema...

FEATURES Active Inrush Limiting - won't blow circuit breakers at turn-on Both speaker and monitor panel outputs Exclusive PowerLight power supply for great bass A hum-free noise floor and ultra-low distortion Only 3.5 inches high; even the most powerful systems can be built with only one rack DataPort interface for DCP Digital Cinema...