Features Optimized for cinema applications Requires less than 17 inches (432 mm) behind screen Two 18-inch (456 mm) woofers with 4-inch (100 mm) voice coils Screw-type barrier-strip connectors Specifications SB-2180 Frequency Range 1 (-10dB) 25 Hz to 150 Hz Rated Noise Power (Voltage) 2 1100 W Sensitivity 3 100 dB Maximum continuous SPL...

Features High Performance for all Cinema applications  8" (203 mm) woofer   1" (25 mm) dome tweeter   Pre-installed speaker-side QM mounting hardware   Accepts YM-300 yoke bracket SPECIFICATIONS SR-800 Frequency Range 1 (-10dB, Half space) 60 Hz to 20 kHz Rated Coverage Angle (-6 dB) 135° conical Maximum Rated SPL 4 Calculated Peak at...

Features Optimized design for small room cinema applications Requires less than 12 inches (305 mm) behind screen 18-inch (457 mm) woofer with 4 -inch  (102 mm) voice coil Screw-type barrier-strip connectors   SPECIFICATIONS   SB-1180 Frequency Range 1 (-10 dB) 29 Hz to 170 Hz Rated Noise Power 2 600 W Sensitivity 3 98 dB Maximum...

Features High output performance with 800 W/1600 W continuous power rating Eight built-in M10 mounting points for overhead suspension 15 mm plywood construction for increased cabinet structural integrity 4 ohm impedance for efficient amplifier power Side mounted hand holds for easy handling during installation Foam-lined perforated...

Features Optimized design for smaller cinemas—up to 35 ft (11 m) in length Single enclosure, two-way screen channel loudspeaker Requires less than 12 inches (305 mm) behind screen Passive crossover requires only one amplifier channel 90° Axisymmetric horn 12 -inch (305 mm) woofer with 2.5 -inch (63 mm) voice coil 1.75 -inch (44 mm)...

Features Optimized design for smaller cinemas—up to 45 ft (14 m) in length Single enclosure, two-way screen channel loudspeaker Requires less than 12 inches (305 mm) behind screen Passive crossover requires only one amplifier channel 90° Axisymmetric horn 15 -inch (380 mm) woofer with 3 -inch (76 mm) voice coil 1.75 -inch (44 mm) voice...

This product has been discontinued. Please check with your Q-SYS regional sales representative for remaining stock availability.  Consider the PL Series performance loudspeakers as a replacement: PL-LA : passive installation line arrays designed to deliver premium sound, ideally for small to medium sized venues PL-SUB : passive...

Features Inverted aluminum dome dust cap Rated at 16 Ω Locking 2-pole Euroblock connectors X-Mount™ Mini mounting hardware provides repeatable angles without drift or sag Intrinsic Correction™ voicings available via MP-M Series mixers and Q-SYS Platform Available in black (RAL 9011) or white (RAL 9010) Specifications AD-S.SAT LF...

Key Features XLR input provides connectivity for dynamic microphones with 50 dB of adjustable gain ¼” connector includes a fixed attenuator pad for +4 dBu nominal input levels 3.5 mm jack provides consumer (-10 dBV nominal) input level with 20 dB of adjustable gain and is summed to mono Audio signal level indicator LEDs for each input...

Features Higher power handling at standard ceiling heights to enable high-energy venues Consistent tonal characteristics across the entire AcousticDesign Series let you mix and match form factors across your venue Snap-fit magnetic grille 3x double stepped, long travel dog-ear blind mount system Advanced Intrinsic Correction™ voicings...