AP-5122

12"-Hochleistungslautsprecher, 2-Wege, 90˚ konisch DMT™


Features

  • Directivity Matched Transition® (DMT) gewährleistet eine ausgewogene Leistung über den gesamten Abdeckungsbereich
  • Kompressionstreiber mit 3-Zoll-Membran sorgt für klare und kraftvolle Höhenwiedergabe
  • M10-Gewinde und Montagebügelvorbereitung bieten flexible Einsatzmöglichkeiten für verschiedene Anwendungsbereiche
  • Klares, professionelles Design mit Logo-freiem Gitter passt zu den meisten Einrichtungen und Installationen
  • NL4 SpeakON-Buchse und abgedeckte Schraubklemmen
  • Umschaltbar zwischen Bi-Amp und passiv
  • Gehäuse aus Birken-Multiplex 15-lagig
  • Pulverbeschichtete Frontgitter (Blechstärke Gauge 16)
  • Erhältlich in schwarz (RAL 9011) und weiß (RAL 9010)
  • Komplette EASE-, CAD- und BIM-Informationen online verfügbar
  • Kann auch als Hochleistungs-Surroundlautsprecher in Kinos verwendet werden
  AP-5122
Frequency response (-10 dB) 48 Hz - 18 kHz
Rated noise power / voltage1 550 watts / 60 volts rms
Broadband sensitivity2 95 dB SPL
Coverage angle 90˚ conical DMT™
Directivity factor (Q) 6.0
Directivity index (DI) 7.8
Recommended crossover 950 Hz, 48 dB/octave
Maximum SPL at 1 m (passive) 122 dB continuous3
128 dB peak4
Rated impedance
HF transducer 76 mm (3-inch) voice coil, compression driver;
72 W / 24 V (2 hours)
LF transducer 305 mm (12-inch) driver with 102 mm (4-inch) voice coil;
550 W / 60 V (2 hours)
Optional accessories AP-YM12 Yoke mount 
M10 Kit-W
Enclosure details  
Input connector Covered barrier strip, NL4 connector 
Enclosure material 15-ply Baltic birch plywood 
Attachment points Fifteen M10 threaded inserts
Color Black (RAL 9011), White (RAL 9010)
Grille 16-gauge powder coated steel
Dimensions (HWD) inches 26 × 15 × 13
Dimensions (HWD) mm 660 x 381 x 330
Net weight 65 lb / 29.5 kg

Two hour rating using IEC60268 noise based on minimum impedance 
2 Mid-band based on nominal impedance; 2.83 V at 1 m 
3 Calculated as the nominal sensitivity plus 10× the log of continuous rated power in volts squared divided by nominal impedance 
4 Calculated as the continuous calculated max output plus 6 dB


All specifications are subject to change without notice.