AD-S10T

10 Zoll, 2-Wege-Lautsprecher zur Wandmontage, 90° konisch DMT™


Features

  • Wetterbeständiger 10-Zoll-Tieftöner, 1,4-Zoll-Kompressionstreiber
  • Abstrahlwinkel 90° konisch DMT™
  • 100 Watt, verlustarmer 70-/100-V-Übertrager mit niedriger Sättigung und 8-Ohm-Bypass
  • Maximaler Schalldruckpegel 122 dB (8-Ohm-Bypass)
  • Directivity Matched Transition® (DMT) gewährleistet einen ausgewogenen Frequenzgang im gesamten Abdeckungsbereich
  • Lautsprecher lässt sich mit X-Mount™ leicht mit einer Vielzahl von Winkelpositionen installieren, ohne dass ein allmähliches Verrutschen der Position zu befürchten ist.Weitere Installationsmöglichkeiten mit Hilfe des als Zubehör erhältlichen Montagebügels und M10 Kit-C.
  • Fortschrittliche Klangabstimmung durch Intrinsic Correction™ über die Q-SYS™ AV-Plattform und CXD-Endstufen verfügbar.
  • Leichte ABS-Gehäuse sorgen für langfristige Haltbarkeit und eine dauerhaft gute Optik
  • Wasserdichte Anschluss-Schutzkappe und pulverbeschichtete Aluminiumgitter für erhöhte Wetterfestigkeit
  • Erfüllt die Anforderungen für Staub- und Spritzwasserfestigkeit der Schutzklasse IP-54 nach IEC 60529
  • Erhältlich in schwarz (RAL 9011) oder weiß (RAL 9010)
  • Komplette EASE-, CF2-, CAD- und BIM-Informationen online verfügbar
System Details AD-S10T
Effective frequency range1 50 Hz - 19 kHz
Rated noise power / voltage2 250 watts / 45 volts (rms)
Broadband sensitivity3 92 dB SPL
Coverage angle (-6 dB) 90° conical DMT™
Directivity factor (Q) 10
Directivity Index 10 dB
Maximum continuous SPL4 116 dB
Maximum peak SPL4 122 dB
Rated impedance 8 ohms
Recommended amplifier power
(loudspeaker "program" power)
500 watts
Transformer taps 70 V: 100, 50, 25, 12.5 W and 8Ω bypass

100V: 100, 50, 25 W and 8Ω bypass
HF transducer 1-inch exit / 1.4-inch voice coil compression driver
LF transducer 10-inch weather resistant paper cone woofer

2.5-inch / 64 mm voice coil
Input connector type Euroblock connector with parallel output terminals
Enclosure material  Painted ABS polymer
Grille material  Powder coated aluminum
X-Mount material  Powder coated aluminum
Enclosure Details
Ingress protection  IP-54
Operating environment Designed for indoor and outdoor use
Testing The AD Series loudspeakers qualified for outdoor use using the following tests:
 
  • Salt fog: MIL-STD-810G Method 509.5 for 100 hrs.
  • Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days
  • High and low temperature: tested to QSC internal standards between -20° and 50° C
 
Net weight 31 lb / 15 kg
Product dimensions
(HWD) inches
20.3 × 12.5 × 11.7
Product dimensions
(HWD) mm
516 × 318 × 298
Shipping weight 40.6 lb / 18.45 kg
Shipping dimensions
(HWD) inches
31.7 × 16.1 × 16.1
Shipping dimensions
(HWD) mm
805 × 409 × 409
Included accessories X-Mount mounting system, Euroblock connector,
input panel cover 
Optional accessories YMS10T yoke mount, M10 Kit-C

1 Free-field, -10 dB from on-axis sensitivity
2IEC60268-1 noise signal for 2 hours
3On-Axis, free-field sensitivity, 2.83V, 1 m
4Calculated from rated noise voltage and sensitivity


All specifications are subject to change without notice.