8", 2 vías, cobertura cónica DMT de 90°

Certified for Microsoft Teams badge


  • Woofer de 8" de baja frecuencia
  • Transductor de compresión de diafragma de 1.4''
  • Potencia nominal continua de 200 watts
  • Transformador multitoma de 70V/100V incluido (el sistema puede funcionar en modo distribuido o de baja impedancia)
  • Conjunto de bafle/transductor AD-C820 para la instalación independiente en caja trasera

AD-C820 se vende en los siguientes paquetes del sistema:

    • Bafle de altavoz AD-C820
    • Ensamble de caja trasera AD-C800BB
    • Rejilla redonda AD-C800RG (blanco, se puede pintar)
    • Bafle de altavoz AD-C820
    • Ensamble de caja trasera AD-C800BB
    • Rejilla cuadrada AD-C800SG (blanco, se puede pintar)
Configuration Passive
Low-frequency Transducer 8-inch (203 mm) ferrite woofer
Hight-frequency Transducer 1.4-inch (36 mm) neodymium compression driver
Frequency Range 1
Frequency Response (-6 dB)
Useable Frequency Range (-10 dB)

61 Hz to 18 kHz
52 Hz to 18 kHz
Maximum Output 2
Calculated Peak Output
Calculated Continuous Output

120 dB SPL
114 dB SPL
Nominal Coverage 90° horizontal and vertical
Nominal Impedance 16 ohms
Power Rating
Continuous power handling3
Recommended amplifier power
(loudspeaker "program" power)

200 W
400 W
Sensitivity 91 dB SPL, 1W/1m
Bass Loading Ported
Transformer Type Custom low distortion laminated core, wide bandwidth design
Transformer Taps 100 V: 16 ohms bypass, 100 W, 50 W, 25 W
70 V: 16 ohms bypass, 100 W, 50 W, 25 W, 12.5 W
Agency Rating CE, UL 1480 (commercial/professional use) UL 2043 (air handling spaces)


Enclosure Volume AD-C800BB: 18 liter (0.64 ft³)
Connectors Back box (AD-C800BB): ceramic block connector inputs and
“through” connectors (rated for 400 W max). Loudspeaker Baffle
(AD-C820): 10-pin MATE-N-LOK™ connector and faston connectors.
Mounting Hardware Pre-installed, suspended, back box, four vertical mounting straps.
Loudspeaker Baffle: captive, integral Mounting Clamps.
Weight - Net AD-C820: 8 lb (3.6 kg)
AD-C800BB: 9.5 lb (4.3 kg)
System Weight: 17.5 lb (7.9 kg)
Dimensions Diameter: 14.9-inch (379 mm)
Enclosure only Depth: 8.3-inch (211 mm)
Enclosure with mounting straps Depth: 11.2-inch (284 mm)

1All frequency ranges specified refer to measured half-space response (2 pi).
2Calculated maximum peak SPL at 1 m, half-space, speaker operating at rated rms power pink noise input, 50 Hz to 20 kHz.
3Maximum input power tested in accordance with IEC recommendations; 50 Hz to 20 kHz band limiting, 6 dB signal crest factor.

Specifications are subject to change without notice.

QSC and the QSC logo are registered trademarks of QSC Audio Products LLC in the U.S. Patent and Trademark office and other countries.
AcousticDesign is a trademark of QSC Audio Products, LLC. MATE-N-LOK is a trademark of Tyco. All other trademarks are the property of their respective owners.