AD-DWL.360
The Direct Weather Landscape speaker is a 2-way system that shall incorporate a 5.25-inch woofer with a weather resistant cone and two 1” aluminum dome tweeters with rubber surround. The form factor is a bollard design PP enclosure with 20% fiberglass.

The system shall meet the following performance criteria: nominal coverage angle of 360 degrees; frequency response of 55 Hz to 25 kHz +0/-10 dB, measured on axis; sensitivity of 84 dB SPL in half space at 1 meter with an input of 4 V RMS; maximum continuous output of 103 dB SPL; maximum peak output of 109 dB SPL on axis at 1 meter; power handling of 70 watts for 2 hours with an IEC noise signal; recommended amplifier power of 120 watts; nominal impedance of 16 ohms.

The loudspeaker shall have a switchable low-distortion, wide-bandwidth laminated core transformer with taps for 60, 30, 15, and 7.5 watts at 70V and 60, 30, and 15 watts at 100V. The system shall be switchable between 16Ω (bypass) and constant-voltage operation.

The bollard design shall have a green (RAL 6020) paintable finish with UV inhibitors to prevent discoloration. 

The loudspeaker shall have a pre-installed collar mount for surface mounting conditions. For buried in-earth applications, the AD-DWL.BASE shall be used. Wiring connections shall be made through the base accessory mount.

The loudspeaker shall meet or exceed requirements in UL1480A. The loudspeaker shall meet or exceed IEC 60529, IP-55 splash rating for ingress protection. The switchable transformer components shall be listed under UL333734, UL239508 and others. The enclosure shall meet UL94-V0 flammability ratings and shall comply with the UL746C F1 rating for outdoor use.

The loudspeaker's enclosure shall be 30.16-in (76.6 cm) high, 6.46-in (16.4 cm) wide, 6.46-in (16.4 cm) long. The loudspeaker shall weigh no more than 16.6 lbs (7.53 kg).