TSC-101-G3 networked touch screen controller The networked touch screen controller shall enable control of a Q-SYS system via a 24-bit color LCD screen display to drive the liquid crystals and a projective capacitive touch surface for user input. The controller's display shall be rectangular with a 16:10 aspect ratio and a diagonal dimension of 10.07 inches (255.8 mm). It shall have a 1920 x 1200 pixel resolution and up to 380 candelas/m2 (or nits) brightness. The display shall be framed by a rectangular black trim 9.97 inches x 6.24 inches (253.2 mm x 158.5 mm). The controller shall be designed to mount on a wall surface and attach to standard North American and European wall and junction boxes in either a landscape or portrait orientation. When mounted, the face of the controller’s panel shall protrude 1.54 inches (39.1 mm) from the wall surface. The controller shall communicate with the Q-SYS Core system processor via 1000 Mbps Ethernet using standard TCP/IP protocols and shall have an RJ-45 jack on the rear panel for this purpose. The touch screen controller's user control interface (UCI) pages (with graphics, controls, and indicators) shall automatically load from the active Q-SYS design in the Q-SYS Core system processor via the Ethernet connection. The UCI pages shall be developed in Q-SYS Designer Software using its UCI tool; its supported graphics types shall include such common color or grayscale bitmap formats as .png, .jpg, .svg, and .gif. Any Q-SYS objects that can be placed on the Q-SYS Designer Schematic shall also be placeable on UCI pages; these shall include linear and rotary faders, buttons, meters, indicators, etc. The controller shall be an IEEE 802.3at class 4 device that can be powered through its Ethernet connection from a Power over Ethernet (PoE) supply. The controller shall have an operating temperature range of 0 C to 50 C (32 F to 122 F) and shall be operable in non-condensing relative humidity as high as 85%. It shall typically dissipate 47 BTU heat per hour. The networked touch screen controller shall be the QSC TSC-101-G3.