Page Station The Q-Sys Page Station is a QSC Q-Sys system audio input and output device. The system shall operate on a native gigabit Ethernet network, employing DiffServ quality of service, IEEE 1588 audio clock synchronization, UDP/IP data transport, and floating-point format audio data representation. The overall system latency from analog input to synchronized analog output(s) shall be 2.5 ms or less. For routed networks, the end to end system latency shall be 3.2 ms or less. The Page Station shall have the capability of being redundant in that it provides redundant "hot" network connections for seamless audio stream failover. The Page Station shall be capable of utilizing Power over Ethernet (PoE), or an external +24V power supply. The audio I/O capacity of the Page Station shall be one microphone and one auxiliary input and one auxiliary line out. The Page Station shall also support up to four GPIO connections. The Page Station shall have the following front panel controls and indicators: 240 x 64 monochrome LCD graphics display, BUSY - red LED, READY - green LED, RECORD - red LED, keypad activity - green LEDs, Zone BUSY indicators - red LEDs, Zone READY indicators - green LEDs, TALK / START indicator - green LED. The PS-1650 and PS-1600 shall have 17 capacitive touch buttons, the PS-800 shall have 9 capacitive touch buttons, and the PS-400 shall have 5 capacitive touch buttons. All PS-XXXXH (hand-held microphone) models shall have a stainless steel plate for mounting the microphone when not in use. The PS-XXXXG (gooseneck models) shall have a fixed gooseneck microphone. All models shall provide microphone verification ensuring that the microphone is present and capable of being used. The Page Station shall have the following rear panel connectors: Q-Sys Network LAN A and LAN B - RJ45 1000 MBps only, GPIO - 6 pin Euro connector, DC Power +24V inlet - 2 pin Euro connector, Aux Line input - 3 pin Euro connector, Aux Line output - 3 pin Euro connector. The Q-Sys Page Station dimensions shall be: (HWD) 10.4" x 8.3" x 1.5" (26.4 mm x 21.1 mm x 3.8 mm). The system input and output device shall be the QSC Q-Sys Page Station.