Q-SYS NV-21-HU

The network video endpoint shall have one HDMI 2.0 input, one USB-C input, and one HDMI 2.0 output. The endpoint must support video distribution for formats up to 3840x2160p60 4:4:4 from both HDMI and USB-C inputs. The USB-C input of the network video endpoint shall support a single connection for audio and video distribution through USB-C alt-mode DisplayPort, bridging audio and video signals to an application on the host via UAC/UVC, and USB-C PD (power delivery) of up to 65 Watts shall be available for device charging. The endpoint shall support Consumer Electronic Control (CEC) of connected devices on the HDMI Output. The endpoint shall support USB HID signal routing between hosts and devices.

The network video endpoint shall be user configurable to be either a transmitter (encoder) or receiver (decoder). The network video endpoint shall use Q-SYS Shift data compression to ensure high-quality and low-latency network video transport of video formats up to and including 3840x2160p60 with 4:4:4 chroma sampling. It shall support HDCP 1.4 & 2.3 and encrypt video transmission on the network. The HDMI 2.0 output must scale incoming content from the network and local input connections. 

The endpoint shall be powered by an external 12V DC 9 A auxiliary power supply or via PoE Type 3, Class 5 (40w at PD, 45W at PSE) from a capable network switch or midspan injector. It is acceptable for an auxiliary power supply to be required if device charging is needed. 

The network video endpoint shall operate natively on a standard gigabit Ethernet infrastructure available from a broad range of network infrastructure manufacturers, employing DiffServe quality of service (QoS), IGMP, IEEE 1588-2008 (PTPv2) precision time protocol, UDP/IP audio, and video transport with floating point format audio data representation. The endpoint shall support 802.1x authentication. The endpoint shall communicate with the system audio processor without needing AES67, Dante, or Media Stream receiver components. 

The network endpoint shall measure 7.3 x 5.2 x 1.2 in (185 x 131.5 x 30.5 mm). 

The network video endpoint shall be the Q-SYS NV-21-HU.