The video camera shall have an RJ-45 connector for connecting to a 1000 Mbps Ethernet network. The camera shall only be powered via Power over Ethernet (PoE). The camera shall use the network for transmitting video to one or more bridging endpoints without the need for USB extenders. The camera shall also use the network for control and monitoring.

The camera shall have a 1/2.8” CMOS 4K image sensor with a ≥55dB signal-to-noise ratio. The lens shall have  a 12x opitcal zoom, a horizontal field of view of 80° - 7.5°, and a focal length of 3.47 - 41.65mm. The camera shall utilize motors for pan, tilt, and zoom (PTZ) and output a IP video stream from the camera directly to the bridging endpoint. The camera movement shall be controlled exclusively via the network. The camera output shall have a 16:9 aspect ratio.

The camera shall include a bracket to allow for the camera to be surface mounted. The camera should have an optional mounting accessory for ceiling mounted installations. The camera should have necessary imaging controls to allow for inverted mounting.

The camera shall have an operating temperature range of 0°C - 40°C and a storage temperature range of -40°C - 60°C. The camera shall weigh no more than 2.4 kg and shall not exceed 142mm x 201mm x 170mm (width, height, depth) in size.

The camera shall integrate natively with the QSC Q-SYS Ecosystem for discovery, control, signal routing, firmware management, and bridging.

The camera shall be the QSC Q-SYS NC-12x80.