AcousticCoverage Series

 

 

AcousticCoverage™ is designed to offer sound system designers and installers a cost effective solution for applications where voice reinforced coverage is of primary concern, while providing improved musicality often not seen in typical BGM class products.  Applications for AcousticCoverage™ speakers include wide area paging systems and background music and more.

SELECT A MODEL

  AC-C2T AC-C2T-LP AC-C4T AC-C6T AC-C8T

Frequency Range, -10 dB (Hz)

 70 Hz - 20 kHz 70 Hz - 20 kHz 70 Hz - 16 kHz 65 Hz to 20 kHz 52 Hz to 20 kHz

Nominal Coverage

 170° conical 170° conical 140° conical 110° conical 100° conical

Rated noise power1

 16 W 16 W 16 W 30 W 80 W

Broad-band sensitivity2

 84 dB 84 dB 89 dB 89 dB 89 dB

Driver

 2.75-inch treated paper cone with rubber surround 2.75-inch treated paper cone with rubber surround 4-inch polypropylene cone with rubber surround 6-inch polypropylene cone with rubber surround 8-inch polypropylene cone with rubber surround

Controls / Selectors

 70 V: 16, 8, 4, 2, 1 W
100 V: 16, 8, 4, 2, 1 W
8Ω Externally Selectable		 70 V: 16, 8, 4, 2, 1 W
100 V: 16, 8, 4, 2, 1 W
8Ω Externally Selectable		 70 V: 16, 8, 4, 2, 1 W
100 V: 16, 8, 4, 2, 1 W
8Ω Externally Selectable		 70 V: 30, 15, 7.5, 3.7, 1.9 W
100V: 30, 15, 7.5, 3.8, 1 W
8Ω Externally Selectable 		 70 V: 60, 30, 15, 7.5, 3.8 W
100 V: 60, 30, 15, 7.5 W
8Ω Externally Selectable

Input Connectors

 Euroblock connector with parallel output terminals Euroblock connector with parallel output terminals Euroblock connector with parallel output terminals  Euroblock connector with parallel output terminals  Euroblock connector with parallel output terminals

Dimensions (WD) inches

 8.4-inch x 7.9-inch 10.4-inch x 3.8-inch 8.4-inch x 7.9-inch 10.24-inch × 8.4-inch 12.4-inch × 11.3-inch

Dimensions (WD) mm

 214 x 201 mm 263 x 97 mm 214 x 201 mm 260 × 213 mm 381  x 381 mm

Net Weight

 4.2 lb / 1.9 kg 4.2 lb / 1.9 kg 4.9 lb / 2.22 kg 7.6 lb / 3.5 kg 11.5 lb / 5.2 kg
  Details  Details Details Details Details

1 Continuous IEC specified test signal, 2 hours unless otherwise stated.
2 Based on nominal impedance, measured in full space. 1 W @ 1 m.

 

All specifications are subject to change without notice.