AD-S32T
3 pulgadas, 2 vías, cobertura cónica de 100°
Características
- Woofer de cono de polipropileno de 3"
- Tweeter de cúpula de titanio de 0.75"
- Potencia admisible continua de 30 watts, pico de 120 watts
- Transformador multitoma de 70V/100 volios con bypass de 8 ohm
- Incluye conjunto de montaje de bola y montaje de estribo
- Disponible en blanco o negro
El paquete incluye:
Dos altavoces AD-S32T
Dos montajes de estribo
Dos montajes de bola
Dos tapas de protección del conector
SPECIFICATIONS | AD-S32T |
Configuration | Compact two way, ported enclosure |
Transducers Low-frequency High-frequency | 3-inch (7.6 cm) weather resistant, polypropylene cone woofer 0.75-inch titanium dome tweeter |
Frequency Range 1 Frequency Response (-6 dB) Useable Frequency Range (-10 dB) | 73 Hz to 20 kHz 65 Hz to 20 kHz |
Maximum Output 2 Calculated Peak Output Calculated Continuous Output | 105 dB SPL 99 dB SPL |
Nominal Impedance | 8 ohms switchable |
Power Rating Continuous power handling3 Recommended max amp power | 30 W (100 hours IEC) 60 W (loudspeaker "program" power) |
Sensitivity | 85 dB, 2.83 V, 1 m, free space (4 pi) |
Nominal Coverage | 100° × 100° |
TRANSFORMERS | |
Type | Custom low-distortion laminated core, wide-bandwidth design |
Taps | 70 V: 30, 15, 7.5, 3.8 W / 8Ω bypass> 100 V: 30, 15, 7.5 W / 8Ω bypass |
Environmental | Exceeds Mil Spec 810 for humidity, salt spray and dust; IEC 60529 IP-X3 splash rating |
Agency Rating | Transformer—listed UL1876 |
ENCLOSURE | |
Material | Injection molded, weather resistant high impact polystyrene |
Finish | White or black (paintable) |
Grille | Heavy duty powder coated aluminum |
Connectors | Screw terminals |
Mounting hardware | Ball mount assembly; yoke mount bracket included |
Product Dimensions H x W x D | 7.9-inch x 4.8-inch x 5.5-inch 202 mm x 123 mm x 140 mm |
Weight | 4 lb (1.8 kg) net 10 lb (4.5 kg) shipping (pair) |
1All frequency ranges specified refer to measured free field response.
2Calculated SPL at 1 m, (free space, 4 pi), speaker operating at rated continuous power with pink noise within specified frequency range
3Maximum input power tested in accordance with IEC 268-5 recommendations, 50 Hz–20 kHz band limiting, 6 dB signal crest factor.
Specifications are subject to change without notice.
The versatile mounting options and compact size of the AD-S32T make it a perfect fit for most any application. (Some mounting accessories sold separately)