AP-4122m

12" koaxial, 2-Wege, 90° konisch DMT™


Features

  • Directivity Matched Transition® (DMT) bei 2-Wege-Modellen gewährleistet eine ausgewogene Leistung über den gesamten Abdeckungsbereich
  • Kompressionstreiber mit 3-Zoll-Membran (1,75 Zoll beim AP-4122m) sorgt für klare und kraftvolle Höhenwiedergabe
  • M10-Gewinde und Montagebügelvorbereitung bieten flexible Einsatzmöglichkeiten für verschiedene Anwendungsbereiche
  • Hochständerflansch (AP-5122m und AP-4122m)
  • Zwei M20-Gewinde für Hochständer am AP-212sw
  • Klares, professionelles Design mit Logo-freiem Gitter passt zu den meisten Einrichtungen und Installationen
  • NL4 SpeakON-Buchsen (2 am AP-4122m und AP-212sw) und abgedeckte Schraubklemmen (nicht am AP-4122m und AP-212sw)
  • Umschaltbar zwischen Bi-Amp und passiv (AP-4122m nur passiv) mit Ausnahme des Subwoofers AP-212sw
  • Gehäuse aus Birken-Multiplex 15-lagig (15 mm Birken-Multiplex beim AP-4122m und AP-212sw)
  • Pulverbeschichtete Frontgitter (Blechstärke Gauge 16)
  • Erhältlich in schwarz (RAL 9011) und weiß (RAL 9010) (AP-4122m und AP-212sw nur in schwarz)
  • Komplette EASE-, CAD- und BIM-Informationen online verfügbar
SPECIFICATIONS AP-4122m

Frequency response (-10 dB)

55 Hz - 20 kHz

Rated noise power / voltage1

325 watts / 36 volts rms

Broadband sensitivity2

96 dB SPL

Coverage angle

90˚ conical DMT™

Directivity factor (Q)

6.3

Directivity index (DI)

8.0

Recommended crossover

N/A

Maximum SPL at 1 m (passive)

121 dB continuous3
127 dB peak4

Rated impedance

HF transducer

45 mm (1.75-inch) voice coil, compression driver

LF transducer

305 mm (12-inch) driver with 64 mm (2.5-inch) voice coil

Optional accessories

AP-YM12M Yoke mount 
M10 Kit-W eye bolt

Enclosure details

 

Input connector

Two NL4 connectors

Enclosure material

15 mm Baltic birch plywood

Attachment points

Eleven M10 threaded inserts

Color

Black (RAL 9011)

Grille

16-gauge powder coated steel

Dimensions (H×W×D)

22.5-inch × 15.1-inch × 14.5-inch / 510 × 385 × 370 mm

Net weight

18.1 kg (39.7 lb)

As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.

2 hour rating using IEC60268 noise based on minimum impedance 
Mid-band based on nominal impedance; 2.83 V at 1 m for 8Ω loudspeakers or 2 V at 1 m for 4Ω 
Calculated as the nominal sensitivity plus 10× the log of continuous rated power in volts squared divided by nominal impedance 
Calculated as the continuous calculated max output plus 6 dB