AD-S282H

2 x 8 Zoll, 2-Wege-Lautsprecher zur Wandmontage, 90° x 60° (drehbar)


Features

  • Moderner Stil, wetterfestes Gehäuse und wetterfeste Komponenten – ideal für eine breite Palette von Anwendungen.
  • 2-Wege-System mit zwei 8-Zoll-Lautsprechern in einem leichtem Mehrzweckgehäuse mit robustem pulverbeschichteten Aluminiumgitter.
  • Vielseitige Montagemöglichkeiten – Der im Lieferumfang enthaltene Montagebügel erlaubt wahlweise die vertikale oder horizontale Montage. Vorbereitet zur Verwendung mit der separat erhältlichen OmniMount™-Halterung.
  • Drehbarer Advanced Directivity™ Waveguide (90° × 60°) ermöglicht eine genaue Fokussierung des Sounds unabhängig von der Ausrichtung des Lautsprechers.
  • Versionen für niederohmige Lasten bzw. mit Übertrager verfügbar. Während die 8-Ohm-Standard-Version sich für passiven oder Bi-Amp-Betrieb umschalten lässt, verfügt der AD-S282HT über einen Ausgangsübertrager für verteilte 70-/100-Volt-Systeme.

Package Includes:

AD-S282H or AD-S282HT loudspeaker
Yoke mount and hardware 
Connector protection cap

SPECIFICATIONS AD-S282H / AD-S282HT
Configuration Compact two way, ported enclosure
Transducers
Low Frequency Transducer

High Frequency Transducer
Dual 8-inch high power, treated paper cone, 2-inch voice coil, neodymium magnet

1-inch high output compression driver
Frequency Range1
Frequency Response (-6 dB)
Useable Frequency Range (-10 dB)

80 Hz - 27.7 kHz
60 Hz - 29.5 kHz
Maximum Output (SPL at 1 m)2
Fullrange (passive mode)
LF (biamp mode)
HF (biamp mode)
 
Continuous Peak
120 dB 126 dB
124 dB 130 dB
121 dB 127 dB
 
Nominal Impedance
Passive
LF
HF

8 ohms
8 ohms
8 ohms
Power Rating3
Passive
LF
HF

450 W (IEC 8 hours)
500 W (IEC 8 hours, 50 Hz - 2 kHz)
45 W (IEC 8 hours, 2 kHz - 20 kHz)
Recommended Max Amp Power (Passive) 900 W RMS
Sensitivity (SPL, 1 W at 1 m)4
Passive
LF
HF

93 dB (100 Hz - 10 kHz)
97 dB (200 Hz - 2 kHz)
104 dB (2 kHz - 10 kHz)
Nominal Coverage 90° H x 60° V (-6 dB) (rotatable to 60° H x 90° V)
Bass Loading Ported, tuned to 60 Hz

Transformers (AD-S282HT)

Type Custom low distortion laminated core, wide bandwidth design
Taps 70V 200, 100, 50, 25 W; 8Ω bypass
100V 200, 100, 50 W; 8Ω bypass

Enclosure

Material Injection molded, weather resistant, high impact polystyrene
Finish White or black (paintable)
Weather Resistant Yes
Grille Heavy duty powder coated aluminum
Connectors Barrier strip, (switchable: passive/active on AD-S282H)
Mounting Hardware Yoke mount (included)
Weight 27.7 lb (12.6 kg) net
35.6 lb (16.1 kg) shipping

1 All frequency ranges specified refer to measured free field response (full space, 4pi)
2 Calculated using specified power capacity and system sensitivity. 6 dB peak-to-average signal ratio assumed.
3 Continuous IEC specified test signal
4 Based on nominal impedance, measured in full-space.

All specifications are subject to change without notice.